805nm 2W 100μm Aperture B-Mount Laser Diode with Microlens

Description

805nm 2W
B-Mount Laser Diode with Microlens
Description:
This is an 805nm laser diode,which can output 2W optical power from its 100μm aperture. It was bonded onB-Mount, which was made in the USA. Microlens (FAC lens) is attached on the B-Mount. It came to us with a lot of otherelectronic/opto-electronic related surplus. We have 1 such lasers in stock.The lasers are brand new not used.
Specifications:
Characteristics
Specification
805nm 2W B-Mount Laser Diode with Microlens
CW output power (W)
2.0
Peak wavelength (nm)
803.0 — 806.0
Spectral width (nm)
≤
4
Threshold current (A)
≤
0.5
Operating current (A)
≤
2.5
Slope efficiency (W/A)
≥
1.0
Beam divergence θ
∥
×
θ
⊥
(deg.)
8/1.5
Wavelength temperature coefficient (nm/
℃
)
0.3
Emitting area (μm)
100
×
1
Lifetime(hour)
>10,000
Package
B-Mount with Microlens
Data Sheet
Available for each diode
By Bidding,you must agree and accept:
·
You are over 18 years old and understand the dangers andrisks of laser use, and will use this component responsibly.
·
You will use this component in a legal, safe manner toensure audience and personnel safety.
·
You have a working knowledge of laser diodes. You understandESD, and the static sensitivity of this component.
·
Laser beam is harmful for eyes during process. Please avoidany directly see on the aperture. Never shine laser beam on human or animals.
·
You accept these diodesas electronic components for integrating them into a system designed byyourself. You relieve the SELLER, and E-bay from any and all LIABILITY fromdamage or injury that may arise from use of this laser.
If you are not serious, please do not placea bid.
Returnpolicy:
·
We will test the lasers before shipment; buyer shouldcontact us as soon as he find it is defective;
·
Refund request should be made within 14 days buyer receivesthe product;
·
Replacement request should be made within 30 days buyerreceives the product;
·
Since this is a Do-It-Yourself laser diode, we only refundif the product arrive to be defective; so please use it gently and properlywhen you assemble your device; you also need to send back in originalshape to get refund/replacement; we won't refund or replace if the laser wasdamaged by buyers;
Some tipsfor operating laser diode:
·
Please use a power supply with stable output. Transientcurrent spikes should be avoided.
·
Please always connect the pins correctly.
·
Heat sink with good thermal dissipation is required forholding the laser otherwise the laser will be burned.
·
Please use eye protection when you operate the laser.
·
It is betterto wear an antistatic wrist band.
·
You shouldalways start with current well below the diodes maximum (about 2.5 amps in thiscase).