Single Phase to 3 Phase Converter, My-PS-2 Model, Suitable for 1HP(0.75Kw) 3 Amp

Description

Single Phase to 3 Phase Converter, My-PS-2 Model, Suitable for 1HP(0.75Kw) 3 Amp 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input/Output 200V-240V, Digital Type
Product Description:
The failure rate is remarkably low
You should check the ampere of your motor and purchase the suitable Motor. And please give us the information about your motor purpose to recommend suitable DPS to you. Also, please note the below points carefully. 1. This item is worked at 1HP motor.(0.75KW, 3 amps) 2. The efficiency is around 85%. 3. The input/output voltage of our DPS is 200v~240v. 4. The voltage of the motor should be 200v~240v. If the voltage of your motor is 380v or 440v, you should change the wire of the motor to 200v~240v purpose to connect with the output of our DPS. 5. This item should be used as one DPS per one motor. Multiple motors are not allowed. 6. The thickness of the wires should be suitable for ampere. 7. Only a single-phase motor brake is allowed.(Three-phase the motor brake is not working at our DPS) 8. You could check three-phase on the output of DPS when your motor is running. If your motor is not running, you could not check three-phase from the output of DPS. 9. If your motor has a magnetic starter, or electronic switch, or brake, the operating wires of this device should be connected on “U” and “W” of the output of our phase converter. Thus, if your motor is not running well or the motor is reversing, you should turn off the power immediately and you have to switch the wires on output(U, V, W) of our phase converter. Actually, when you connect the wires from the output of the phase converter to your motor, you could succeed in the first time, or second time, or third time.
Note:
This product has purchased by a local distributor