Static Phase Converter 8 to 12 HP Run 3-Phase motors w/single 230VAC, ASPC-10DH

Description

AUcontrols
Made in USA.
Static Phase Converter Mod. ASPC-10HD
Runs 230VAC 3-Phase Motors with Single Phase Power 230VAC!
DESIGNED TU RUN 3-Phase Motors ONLY! at 2/3 of Rated Motor's HP.
For Light to Medium Loads.
Single Phase Power Input: 208 - 240VAC
HP Range: Min. 8HP - Max 12HP.
Dimensions: 8" X 8" X 4"
1 Year Warranty.
IMPORTANT:
ALWAYS Make sure your Motor's HP is between the Converter's HP!
DO NOT Install a bigger Converter than your Motor's HP thinking it will give you more power, It will NOT work!
Nor use a smaller Converter than your Motor's HP, It will NOT work eaither!
If you have questions please contact us, we'll be happy to assist you with the Phase Converter you need.
You can run:
Lathes above 4 HP not fitted with a clutch, Milling & Drilling Machines.
For Air compressors compressors, blowers, water pumps, hydraulic pumps, etc. The motor's pulley diameter must also be reduced by 1/3 or a 50% larger motor can be fitted.
For heavy starting cycles, frequent starting, instant reverse.
JUST Keep in mind that Static Phase Converters ONLY will give you 2/3 of the Motor's Rated HP.