Static Phase Converter for 12~18 HP, runs 230VAC,3-phase motors w/single phase

Description

AUcontrols
Made in USA
.
Static Phase Converter Mod: ASPC-15HD
Runs 220VAC, 3-Phase Motors with 220VAC Single Phase Power AT 2/3 of rated Motor's HP.
DESIGNED TO RUN ONLY 3-PHASE MOTORS with light to medium Loads.
Power Input: 208~240 VAC, 50/60 Hz.
Single Phase.
Single Phase FLA: 45 Amp.
HP Range: Min: 12 HP. - Max: 18 HP.
Dimensions: 8" x 8" x 4".
1 Year Warranty.
IMPORTANT:
ALWAYS Make sure your Motor's HP is between the Converter's HP!
DO NOT buy a bigger Converter than your Motor's HP thinking it will give you more power, It will NOT work!
Nor use a smaller Converter than your Motor's HP, It will NOT work either!
If you have questions please contact us, we'll be happy to assist you with the Phase Converter you need.
You can Run: Lathes above 3 HP not fitted with a clutch, Milling & Drilling Machines, Saws, etc.
For: Air compressors, blowers, water pumps and hydraulic pumps
with pulley,
The Motor's Pulley Diameter MUST BE REDUCE BY 1/3 or a 50%larger motor can be fitted.
For heavy starting cycles, frequent starting, instant reversing, etc.
Just keep in mind that Static Phase Converters will give ONLY 2/3of the rated Motor's HP.